
Electrophoretic coating for auto parts industry
Product Introduction
HL-1607LB/HLS-1701A Black Cationic Epoxy Electrocoat for auto is a new generation electrophoretic coating researched and developed by HLS Paint (Shanghai) Co., Ltd. It represents modern technology of cathodic electrophoretic coating that is environment-friendly with high property and low cost. Such coating does not contain heavy metal like lead, tin, cadmium and mercury etc. It is a two-component, water-dispersed resin,meanwhile, it took in features of previous products, and can adapt galvanized steel sheet perfectly, almost can be applied to foundation coating of all metal, such as: cold and hot rolled steel sheet, galvanized steel sheet, aluminum products and stainless steel sheet etc.
This product features shown below:
The bath has strong anti-shrink age andanti-pollutionability.
Coating fullness of good,better sub strate hiding.
Strong anti-corrosion properties, good salt spray resistance workpiece edge.
The appearance of the coating is flat, delicate, smooth, uniform high gloss.
Main ingredients
Matrix resin: | Acrylic modified epoxy resin |
Pigment: | carbon black, kaolin, antirust pigment |
Additives | surface active agent, prevent shrinkage cavity agent |
Product quality data
Project | Technical data | Test standard | ||
Resin (HL-1607LB) | Black Paste (HLS-1701A) | |||
Appearance | —— | Milky white liquid | Black viscous liquid,no agglomeration | Visual |
pH | 25℃ | 6.0±1.0 | —— | GB/T 9724 |
Conductivity | 25℃, μs/cm | 1400±600 | —— | HG/T 3334 |
Storage stability | No stratified state, and there were no obvious difference compared to before storage | In 5-35 ℃ temperature 1 year |
Note: pH, conductivity measurement in the resin/pure water = 1:1 dilution
Product film performance
Project | Indicator | Test standard | |
Appearance | Normal / abnormal | Normal | Ocular estimate |
Hardness | ≥ | 2H | GB/T 6739 |
Cup drawing | mm ,≥ | 6 | GB/T 9753 |
Adhesion | Level | 0 | GB/T 9286 |
Flexibility | mm | 1 | GB/T 1731 |
Impact | kg·cm | 50 | GB/T 1732 |
Gloss | 60 | 50-80 | GB/T 9754 |
Water resistance | h,(23±2)℃,≥ | 240 | GB/T 1733 |
Acid resistance | h,(50g/L H2SO4),≥ | 72 | GB/T 9274 |
Alkali resistance | h,(50g/L NaOH),≥ | 72 | GB/T 9274 |
*Salt spray resistance | h,(film thickness ≥ 20μm) ,≥ | 1000 | GB/T 1771 |
* Note: The substrate use the Bonder standard phosphating steel panel, crossed out unidirectional expansion eclipse ≤ 2mm.
Customer production site:
HLS Coatings (Shanghai)Co.Ltd
Since its foundation in November 2003, HAOLISEN has been adhering
to the vision of “Advocator and Innovator of Waterborne Coating
Solutions” and committed to the development and production of
industrial electrophoretic coatings by investing lots of human,
material, energy and financial resources over more than a decade.
CORPORATE CULTURE
Corporate mission: Technological innovation, customer satisfaction, and serving the country through industry.
| ![]() |