
Efficient Stranding Use 1+6 Electric Tubular Strander for 7 Stranded Copper Wire
TUBULAR STRANDING MACHINE
THE EQUIPMENT USAGE:
The machine are mainly used for copper wire,aluminum wire,steel
wire rope,steel-cored aluminium wire stranding and insulated wires
electrical control system.It can be equipped with a tapping device
according to the reques of end user.
THE EQUIPMENT CONFOGURATI0N:
It is installed with stationary pay off stand,stranding body,die
holder,double-haul off device,take up stand,transmission system and
electrical control system.It can be equipped with a tapping device
according to the request of end user.
THE UNIQUE FEATURE:
1.The cylinder body of the machine works as a whole in two
stages,making a radial beating slightly ,being supported by the
front and rear bearings so that it moves steady,makes a low noise
and serves a life long service.
2.The bobbin of the machine is clamped by disc-shaped springs and
eleased by a pneumatic device so that its operation is easy and Its
safety is reliable.
3.As the machine is equipped with the protective links such as an
utomatic stopping device for a wire breakage and an emergency stop
device,it's safe and reliable,
4.The machine has adopted an imported programmable controller so as
to command and oordinate each electronic active status of the whole
machine in unison.
SPECIFICATION:
ItemJ | 500/1+6 | 630/1+6 |
Single copper wire dia.(mm) | 1.3-4.5 | 1.3-4.5 |
Single al wire dia.(mm) | 1.8-5 | 1.8-5 |
Max. Stranded Dia.(mm) | 15 | 15 |
Pitch range | 20-331 | 36-274 |
Tube rotate speed(r/min) | Large bearing type 600 | Large bearing type 500 |
Supporting wheel 500 | Supporting wheel 350 | |
Traction wheel Dia.(mm) | 1250 | 1250 |
Pay off bobbin inside of strander | 500 | 630 |
Take-up bobbin size | PN800-1600 | PN1200-2000 |
Exhibition:
4.Advantage:
1). BEYDE is using only helical precision gear.
2). Special lubrication system for the gears and bearings
3). Second-section-annealing system, outside electrically neutral (no current flow to other unit)
4). Machine’s body and other key components and parts are produced by our own factory, quality is reliable.
5.After-sell service:
1)Pre-sale training
2)12 months for the main machine,6 months for the electrical parts
Main Product:
Cable making equipment
v Wire drawing machine (multiple wire)
v Rod breakdown machine
v Tin-coating machine Rigid frame stranding machine
v Annealing machine
v Copper, Aluminum, Aluminum Alloy, Brass, Wire drawing machine
v Wire and cable production line
v Bunching machine
v CCA wire machine
Payment terms and contact ways
Escrow, T/T, L/C at sight