
The 3-in-1 servo roller feeder is a fully automatic feeding device
for feeding, rectifying and material racking. It is high-tech,
high-precision and high-efficiency. It can be said to be the top
performance of the correcting feeder in the peripheral equipment of
the punching machine.
It has many functions and advantages, saves space and is durable,
easy to operate, and has excellent effects on special length,
extra-wide, and thick materials. It is considered to be an advanced
automatic feeding device in the industry.
1. 3 in 1 feeder roller is not the same, in the leveling or feeding
part appears on one side of the seam to sew small to lead out the
running edge.
2. 3 in 1 feeder material frame of the material guide device has problems, the
design is not reasonable. The irrationality of this design can
easily lead to accidents.
3. 3 in 1 feeder press device is different in tension, the material
wheel is not adjusted properly, the width of the adjusting guide
wheel in the feeding part of the feeding is not adjusted to the
appropriate size, and the width of the discharging wheel is not
adjusted to the appropriate size.
4. 3 in 1 feeder mold positioning tip did not do.
Specification:
Model | MAC2-400 | MAC2-500 | MAC2-600 | MAC2-800 | ||
Stock Width(mm) | 50-400 | 50-500 | 50-600 | 50-800 | ||
Stock Thickness(mm) | 0.3~3.2 | 0.3-3.2 | 0.3-3.2 | -3.2 | ||
Max.Coil Weight(kg) | 3000 | 3000 | 3000 | 5000 | 5000 | 7000 |
Max.Coil O.D.(mm) | 1200 | 1200 | 1200 | |||
Coil I.D.(mm) | 8 | 8 | 508 | 508 | ||
Feed Length(mm) | ~500* | ~500* | ~500* | ~500* | ||
Max. Line Speed(m/min) | 16-24 | 16-24 | 16-24 | 16-24 | ||
Work Roll Number(pieces) | upper 6 lower 5 | upper 6 lower 5 | upper 6 lower 5 | upper 6 lower 5 | ||
Feed Roll Number(set) | 1 | 1 | 1 | 1 | ||
Main Motor(kw) | AC2.9 | AC2.9 | AC4.4 | AC4.4 | ||
Mandrel Expansion | hydraulic | hydraulic | hydraulic | hydraulic | ||
Reel Motor(kw) | 1.5 | 1.5 | 1.5 | 2.2 | 2.2 | 3.7 |
Power(V) | 3 Phase 220V/380V/50HZ | |||||
Operating Air(Mpa) | 0.49 | 0.49 | 0.49 | 0.49 |
Straigtening performance:
tock Thicknees (mm) | Stock Width (mm) | |||
0.3 | 400 | 500 | 600 | 800 |
0.4 | ||||
0.6 | ||||
0.8 | ||||
1.0 | ||||
1.2 | ||||
1.4 | ||||
1.6 | 470 | 470 | ||
1.8 | 400 | 400 | ||
2.0 | 360 | 360 | ||
2.3 | 300 | 300 | 300 | 300 |
2.5 | 230 | 230 | 230 | 230 |
2.8 | 150 | 150 | 150 | 150 |
3.2 | 110 | 110 | 110 | 110 |
*1:(Pneumatic):Option in case of pneumatic mandrel expansion is
provi