White 12v Dry Cell Motorcycle Battery , Three Wheel Motorcycle Dry Battery

Varieties of Lead Acid Batteries

Over the years battery manufacturers have introduced a range of additives such as Calcium, Antimony and Selenium to improve various battery performance parameters. For the same reason, different cell and battery constructions have been developed to optimise various aspects of battery performance.

Lead Calcium Batteries

Lead acid batteries with electrodes modified by the addition of Calcium providing the following advantages:

1, More resistant to corrosion, overcharging, gassing, water usage, and self-discharge, all of which shorten battery life.

2, Larger electrolyte reserve area above the plates.

3, Higher Cold Cranking Amp ratings.

4, Little or No maintenance.

Lead Antimony Batteries

Lead acid batteries with electrodes modified by the addition of Antimony providing the following advantages:

1, Improved mechanical strength of electrodes - important for EV and deep discharge applications

2, Reduced internal heat and water loss due to gassing, however the water loss is still greater than the equivalent loss in Lead Calcium batteries.

3, Longer service life than Calcium batteries.

4, Easier to recharge when completely discharged.

5, Lower cost.

Lead Antimony batteries have a higher self discharge rate of 2% to 10% per week compared with the 1% to 5% per month for Lead Calcium batteries.

Specifications for 12v 2.5Ah lead acid motorcycle battery

Lead acid battery advantages & disadvantages

Although lead acid batteries are widely used because they have a number of distinct advantages, they also have several major disadvantages. All these need to be considered when deciding upon whether to use this technology or not.

Lead Acid Battery Advantages

1, Mature technology

2, Relatively cheap to manufacture and buy (they provide the lowest cost per unit capacity for rechargeable cells)

3, Large current capability

4, Can be made for a variety of applications

5, Tolerant to abuse

6, Tolerant of overcharging

7, Wide range of sizes and specifications available

8, Many producers worldwide

Lead Acid Battery Disadvantages

1, Fails after a few years use lifespan typically 300 - 500 cycles

2, Cannot always be used in a variety of orientations

3, Corrosive electrolyte (can cause burns to people and corrosion on metalwork)

4, Lead is not environmentally friendly

5, Acid needs disposing of with care

6, Not suitable for fast charging

7, Must be stored in charged state once electrolyte introduced

8, Typical charging efficiency only around 70%

Chongqing Chuangxiang Power Source Co., Ltd. of Taiwan Maan Shyang Group, which brings advanced technology from Taiwan Maan Shyang Group, is a professional development, research, production, sales in one of the energy plant. It was founded in 2004, located in Tongliang Industrial Park of Chongqing with an area of about 50000 square meters. The company has 26 inside and outside Formation grooves, 9 assembly production lines of battery, including 2 automatic production lines, and annual production capacity is up to 5,000,000 sets of plates and 5,000,000 sets of batteries, which is the most powerful enterprise of production of plate and battery in the southwest region of China. There is an independent plate production workshop, formation workshop, battery assembly workshop, injection molding workshop, etc.. There are nearly 300 people at present in the company, including more than 200 workers, 30 engineers and professional technical personnel, 30 management staff.

Chongqing Chuangxiang Power Source Co., Ltd. has many independent brands, such as "Chuangxiang", "Xiexiang", "Hanwei", specializing in conventional dry charged motorcycle battery, maintenance free motorcycle battery with acid pack, sealed rechargeable maintenance free motorcycle battery, gel motorcycle battery, tricycle battery, generator battery. High capacity, good seal, quick starting, strong charging receiving ability, long service life, good vibration resistance are our products’ main characteristic.

Quality is our company’s culture. The raw material must be strictly inspected ,and quality of the internal control and external control are use of standardized work instruction, especially the key processes, inspection personnel and testing equipment have their function. Qualified goods, to be processed goods and waste stack in different regions in order to analyze and solve the problems in time when issue occurs.

Chongqing Chuangxiang Power Source Co., Ltd. passed the ISO9001 quality management system certification, ISO14001 environmental management system certification, OHSAS18001:2007 occupational health and safety management system certification, and the CE, MSDS, UL and transport certification are also passed. The factory adopts the most advanced production technology of low pollution lead acid battery -battery formation technology, and passed new treatment system of lead acid sewage (waste) water and lead dust and recycling system management of lead acid sewage(waste) water completely solved the problem of heavy metal pollution in lead acid storage battery manufacturing industry. Chongqing Chuangxiang Power Source Co., Ltd. introduces the current world's most advanced battery production equipment and testing equipment, and is the national environmental protection online monitoring standard enterprise.

Taiwan Maan Shyang Group for a long time does business with the German BMW, Piaggio, Sundiro Honda and Wuyang Honda, Yamaha, Qingqi Peugeot, Great River, Loncin, Zongshen, Dayang, Jianshe, Jialing and other well-known enterprises at home and abroad. Chongqing Chuang Xiang Power Source Co., Ttd. is currently supporting Longxin machine, Dajiang machine, Yinxiang motorcycle, and is plate production base of Yuxiang Battery. On the basis of principle of excellence pursuit,continuous innovation, benefit share and sustainable development, we provide customers at home and abroad with first-class products and service.